2024 Latest AGT 13.5 HP B&S 1 Ton Mini Small Excavator, With Hydraulic Thumb and

• Operating Weight: 940 kg (2,150 lbs / approx. 1 ton)

• Engine: Briggs & Stratton — 13.5 HP Gasoline, Single Cylinder

• Power Output: 9.8 kW at 3,600 RPM

• Cooling: Fan cooling

• Fuel Consumption: 0.5–1.2 L/hr

• Fuel Tank: 6.6 L

• Hydraulic Oil Tank: 18 L

• Max Digging Depth: 1,684 mm (66.3 in / 5.5 ft)

• Max Digging Height: 2,795 mm (110 in / 9.2 ft)

• Max Unloading Height: 1,863 mm (73.3 in / 6.1 ft)

• Max Digging Radius: 3,112 mm (122.5 in / 10.2 ft)

• Bucket Capacity: 0.03 cbm

• Bucket Width: 13 inches (approx. 330 mm)

• Swing Boom: Yes — 30° left / 30° right

• Retractable Tracks: No

• Track Type: 7-inch rubber (180×72×37 sections)

• Bulldozer Blade: 907mm wide × 210mm tall

• Climbing Ability: 30°

• Hydraulic System: 16 MPa rated, 21.6 L/min max flow, 8 multi-way valve

• Operator Protection: Enclosed cab (no air conditioning)

• Hydraulic Thumb: Installed standard

• Auxiliary Hydraulics: Yes

• Warranty: 1 year on parts

What's Included: 13-inch digging bucket (0.03 cbm), hydraulic thumb, push blade, enclosed cab, digital manual

Enclosed Cab — Weather and Dust Protection Without AC The enclosed cab is the primary differentiator that separates the DM13-C from the open-station AGT 1-ton models. The structural cab enclosure provides overhead and side protection from direct precipitation, reducing the physical exposure that limits open-station operators in wet or cold conditions, and providing a meaningful barrier against fine dust and airborne debris during dry earthmoving and land clearing work. For buyers who operate in variable weather — morning dew, light rain, wind-driven dust, and occasional cold snaps across a full work season — the cab protection extends the number of productive hours per season and reduces operator fatigue from environmental exposure during the dig. The absence of air conditioning is an honest trade-off at this machine's weight class and price point: the cab provides protection and partial sound attenuation without the added mechanical complexity, potential service issues, and cost premium that a factory AC system introduces. Buyers who prioritize weather protection over climate control will find the DM13-C's cab configuration well-matched to seasonal outdoor work in temperate climates.

Swing Boom — 30° Left and Right Obstacle-Adjacent Reach The DM13-C's swing boom offsets the arm 30 degrees left or right of the machine's centerline, allowing the operator to dig alongside walls, fences, foundation footings, raised planters, and other fixed obstacles without repositioning the tracks between each cut. For utility trench work running parallel to a structure, fence post hole preparation along an existing property line, or drainage installation adjacent to a building foundation, the swing boom allows the machine to maintain a fixed track position while varying the arm angle to follow the obstacle edge — significantly reducing the number of machine moves required to complete a parallel-to-obstacle trench run and improving the precision of the finished cut near structures. At 30° each direction, the DM13-C covers the most common obstacle-adjacent approach angles encountered on residential and small commercial sites.

Hydraulic Thumb — Installed and Ready The hydraulic thumb ships installed on the DM13-C, eliminating the installation step and compatibility research that open-market thumb purchases require. With auxiliary hydraulics routed to the thumb circuit, the operator controls grip open and close from the cab seat during active operation — grabbing root masses, repositioning rocks too large for the bucket to carry, loading brush bundles onto a trailer, sorting demolition debris, or placing pipe and materials precisely without leaving the operator position. The 8 multi-way valve hydraulic circuit supports thumb operation alongside all other machine functions without sacrificing response in other circuits, maintaining consistent bucket and boom performance while the thumb is in use.

0.03 cbm Bucket — Higher Volume Per Cycle The included 13-inch bucket with 0.03 cbm capacity is slightly larger than the 0.025 cbm standard on most Typhon 1-ton models, moving proportionally more material per dig cycle. For bulk earthmoving, foundation excavation, and trench backfilling where material throughput determines job duration, the added bucket volume reduces the number of cycles required to move a given quantity of soil. The bucket's 13-inch (330mm) width handles standard trench widths for residential utility conduit and small drainage pipe while remaining within the machine's hydraulic capacity at the 1-ton weight class.

9.2-Foot Maximum Digging Height — Loading Clearance for Standard Truck Beds The 2,795mm (110-inch / 9.2-ft) maximum digging height gives the DM13-C the vertical reach needed to clear the side rails of standard pickup truck beds and contractor dump trailer walls during loading — eliminating the repositioning required when a machine's digging height can't clear the load height of the receiving vehicle. At 9.2 feet of vertical reach, the machine can load into any standard pickup bed, most contractor dump trailers, and typical landscaping disposal vehicles without requiring the operator to place the truck at a lower elevation or use an elevated loading ramp. This is also the confirmed tallest maximum digging height in the AGT 1-ton gasoline-powered lineup, exceeding the DM12X-C (which this model most closely compares to) and giving the DM13-C a specific advantage for loading-intensive applications.

10.2-Foot Maximum Digging Radius — Wide Single-Position Work Envelope With a 3,112mm (122.5-inch / 10.2-ft) maximum digging radius, the DM13-C can reach material, load trucks, and dig trenches across a wide horizontal arc from a single machine position. For buyers doing wide-area grading, wide trench cuts, or work that requires reaching across a wide zone without repositioning, the extended digging radius reduces the number of track moves required per work area — keeping the machine in one position longer and making each repositioning more productive. The 10.2-foot reach also improves safety clearance when loading trucks, allowing the truck to park further from the active dig area while still remaining within the bucket's unloading range.

B&S 13.5 HP Fan-Cooled Engine — Familiar Maintenance, Simple Service The single-cylinder Briggs & Stratton 13.5 HP gasoline engine is the same power unit used across the AGT 1-ton lineup, providing consistent fuel and maintenance requirements across the fleet for buyers who operate multiple machines. Fan-cooled single-cylinder gasoline engines have the broadest parts and service network of any small engine platform in North America — service manual availability, replacement parts from multiple suppliers, and technician familiarity at virtually any small engine shop. The 0.5–1.2 L/hr theoretical fuel consumption on 92-octane gasoline makes the running cost per hour predictable and manageable across full-day work sessions, with the 6.6-liter fuel tank supporting extended continuous operation between refills.