top of page
SKU: 9552dfcb-a535-4748-a46f-004265e4996b

Atlas PSP-6000 6,000 lb Portable Single Post Lift

$5,149.00Price
Quantity

The Atlas® PSP-6000 portable single post lift is the perfect choice for the commercial service shop or the Mr. Homeowner who does not want to tie up a bay space with a permanently mounted above ground lift. This portable vehicle lift allows the operator to walk under the vehicle or move around the vehicle to perform wheel service. When the Atlas PSP-6000 is not in use, it may be rolled out of the way into a corner.

The PSP-6000 also has a built-in ramp allowing vehicles to drive over it, further maximizing garage space. The Portable Single Post Lift rolls easily on a level concrete surface and can be used either inside or outside of your garage. The column fits under a 9 foot (108 inch) ceiling and allows the operator to raise most vehicles high enough to access many parts of the vehicle that would not be accessible with a mid-rise lift.

The Atlas® PSP-6000 column is equipped with the chain break mechanism that automatically locks the carriage into place in the unlikely event of a chain failure.

    • Capacity: 6,000 LB.

    • Overall Height: 102 3/4" (8' 6 3/4")

    • Max. Lifting Height (Without Truck Adapters): 71 2/3" (5' 11 2/3")

    • Max. Clearance: 68" (5' 8")

    • Minimum Height: 5"

    • Overall Maximum Dimensions: L: 111 1/2" x W: 96" x H: 102 3/4"

    • Column Size: 10 1/2" x 12 1/2"

    • Distance Between Lifting Pads (Column Side to Offside): 39 1/2" to 81"

    • Distance Between Lifting Pads (Column Side to Column Side): 53" to 73"

    • Distance Between Lifting Pads (Offside Side to Offside): 54 1/3" to 91 1/2"

    • Motor/Electric Requirement: 110volt, 30 amp breaker required

    • Oil Requirement: 3–5 Gallons AW32 or AW46 (NOT INCLUDED)

    • Shipping Weight: 1,900 lbs.

    • Adapter Heights: 4 Each 2.75", 6”

    • Arm Hole/Adapter Peg Size: 2”

    • 6,000 lbs. Capacity

    • Portable Low Profile Design

    • Rigid Base Construction

    • Built-in Drive-over Ramps

    • Single Point Lock Release

    • Two-Stage Telescoping Swing Arms

    • Locking Arm Restraints

    • Lifting Height: 5′ 11 2/3″ (71 2/3″)

    • 110volt Electric Operation (Requires 30amp Breaker)

    • Free 8 Piece Truck Adapter Set

    • Includes Double Screw-up Adapters

    • Shipping Weight: 1,900 lbs.

    • 2 yr Structural – 1 yr Hydraulic Warranty – Parts Only


You Might Also Like

bottom of page