Brand New TYPHON TERROR 3 Ton Mini Excavator USA - TYPHON

Kubota D1105-EF02 — Larger Displacement Three-Cylinder Diesel The D1105-EF02 is a step up from the D902 engine used in the Typhon 4,000-lb class — larger displacement, more cylinders in effective output terms, and rated at approximately 24.8 HP to match the T-30's 3-ton operating weight and the significantly larger hydraulic demands of a 0.1 cbm bucket, 15.3 kN digging force circuit, and 18 MPa hydraulic system. The D1105 series shares Kubota's established service and parts network across North America — the same engine family appears across dozens of commercial compact equipment applications from telehandlers and trenchers to skid steers and utility vehicles, meaning service technicians with D1105 familiarity are accessible in virtually every region. EPA certification ensures the machine meets current US emissions compliance standards for commercial and municipal procurement environments where compliance documentation is a bid requirement. CE certification extends the machine's compliance documentation to European and internationally-recognized safety and performance standards, relevant for buyers whose procurement or insurance requirements specify third-party certification.

0.1 cbm Bucket — Three Times the Material Volume Per Cycle The T-30's 0.1 cbm standard bucket moves more than three times the volume of the 0.03 cbm buckets on Typhon's 4,000-lb class machines in a single dig cycle. For bulk earthmoving, foundation excavation, large trench runs, and any application where total material throughput determines job duration, this difference is not incremental — it directly reduces the number of dig-and-dump cycles required to move a given quantity of material. A project that requires 500 bucket cycles on a 0.03 cbm machine requires fewer than 170 cycles on the T-30's 0.1 cbm bucket. At 12 RPM swing speed, the T-30 cycles through those reduced dig counts efficiently, maintaining consistent production rates across long work sessions.

15.3 kN Bucket Digging Force — Penetrating Compacted and Resistant Material The T-30's 15.3 kN maximum bucket digging force more than doubles the bucket force of the Typhon 1-ton gasoline class (typically 7–9 kN), enabling penetration into material categories that smaller machines manage only with difficulty or multiple passes: compacted clay and hardpan, dense subsoil with embedded rock, agricultural ground that has been repeatedly trafficked and compressed, road sub-base, and disturbed fill that has settled into high-density material over time. The companion 10.5 kN arm digging force supports aggressive arm curl during bucket fill — pulling through dense soil on the dig stroke without stalling or requiring multiple repositions to complete a clean bite. For buyers who regularly encounter problematic soil conditions — rocky soil, heavy clay, highly compacted terrain — the T-30's digging force specification represents the meaningful difference between a machine that works through difficult material and one that struggles against it.

8-Foot Maximum Digging Depth — Foundation and Below-Frost Capability At 2,450mm (96.5 inches / 8.0 feet), the T-30's maximum digging depth opens applications that are outside the practical range of the 4,000-lb class machines and completely inaccessible to the 1-ton gasoline lineup. Eight feet of dig depth covers full residential foundation perimeter excavation in most building codes and frost zone specifications, deep utility trench requirements for municipal water and sewer at below-frost-line depth in cold climates, septic system excavation including both tank pit and leach field trench work, retaining wall footing preparation to structural depth, and stormwater detention basin excavation for residential and light commercial drainage engineering. In frost climates where utility and foundation work must go beyond 6 feet to clear the freeze-thaw zone, the T-30's 8-foot reach is a practical necessity rather than a premium — the Terror XX and Terror XVIII class machines at 6.75 feet max depth cannot reliably complete this work in one machine pass.

12.1-Foot Maximum Digging Height — High-Side Dump Truck Clearance The 3,700mm (12.1-foot) maximum digging height gives the T-30 clearance to load over the side rails of full-size dump trucks, commercial contractor trailers, and high-sided bulk haulers without requiring the receiving vehicle to be lowered or the machine to be positioned on elevated ground. For commercial earthmoving operations where truck loading efficiency drives the production rate — foundation excavation, site grading, mass cut operations, road construction sub-base removal — the machine's ability to clear high load walls directly determines how many truck cycles per hour the operation can complete. At 12.1 feet, the T-30 clears essentially every standard commercial dump truck in the North American market without accommodation or repositioning.

18 MPa Hydraulic System — High-Pressure Commercial-Grade Hydraulics The T-30's 18 MPa hydraulic system pressure supports the machine's 15.3 kN bucket digging force, 10.5 kN arm force, and 12 RPM swing speed simultaneously without the pressure drop and response degradation that lower-pressure systems experience under combined multi-function load. At this pressure rating, the hydraulic system is sized for sustained commercial work cycles — not intermittent residential use — maintaining consistent response across boom lift, arm curl, bucket rotation, swing, and travel functions even during simultaneous multi-function operation. For buyers running the machine through full professional workdays at high utilization rates, the hydraulic system specification matters for cycle-time consistency and long-term component durability under load.

Compact Transport Profile for a 3-Ton Machine At 4,180mm long × 1,350mm wide × 2,200mm tall (13.7 ft × 4.4 ft × 7.2 ft), the T-30 maintains a transport profile that fits a standard equipment trailer for inter-site moves. The 1,350mm (53-inch) machine width fits within standard lane widths and clears most gated access points without track retraction — an important practical consideration for contractors moving the machine between residential job sites where gate access and site ingress geometry varies. The 2,200mm (86.6-inch / 7.2-foot) transport height clears most residential and commercial overhead obstacles including standard garage door openings, low-clearance utility cables, and bridge clearances on typical road haul routes.

• Operating Weight: 3 tons (approx. 6,600 lbs)

• Model Designation: Typhon T-30

• Engine: Kubota D1105-EF02 — 3-Cylinder, Water-Cooled Diesel

• Engine Power: Approx. 24.8 HP

• EPA Certified: Yes

• CE Certified: Yes

• Bucket Capacity: 0.1 cbm

• Swing Speed: 12 RPM

• Max Bucket Digging Force: 15.3 kN

• Max Arm Digging Force: 10.5 kN

• Hydraulic System Pressure: 18 MPa

• Boom Length: 1,850 mm (72.8 in)

• Arm Length: 1,000 mm (39.4 in)

• Max Digging Depth: 2,450 mm (96.5 in / 8.0 ft)

• Max Digging Height: 3,700 mm (145.7 in / 12.1 ft)

• Max Gradeability: 30°

• Overall Length: 4,180 mm (164.6 in / 13.7 ft)

• Overall Width: 1,350 mm (53.1 in / 4.4 ft)

• Overall Height: 2,200 mm (86.6 in / 7.2 ft)

• Warranty: 1 year

• Shipping: Free, from US warehouse