TYPHON KUVUO 4.0 Four Ton Cabin Mini Excavator Kubota D1703 Diesel
The Typhon KUVUO 4.0 represents a significant step up in Typhon's mini excavator lineup — a true 4-ton machine built for operators who need more power, more reach, and more all-day comfort than the compact sub-2-ton class can deliver, without moving into the expense and transport complexity of a full-size excavator. Part of Typhon's newly launched Green Series, the KUVUO 4.0 was engineered around a core principle: maximum performance in tight spaces. Its zero-tail-swing design means the rear counterweight rotates completely within the machine's track footprint, allowing operators to work safely right against foundation walls, building corners, and property lines without the constant risk of a rear collision. Powered by a genuine Kubota D1703 25 HP diesel engine and equipped with a piston pump load-sensing hydraulic system, an enclosed AC/heater cabin, metal tracks, pilot controls, and boom swing, the KUVUO 4.0 delivers the capability and operator comfort of a commercial-grade machine at a price point that makes ownership practical for contractors, landscapers, farmers, and serious property owners alike. This is a machine built to work all day, every day, in the tightest job sites you can throw at it.
Operating Weight: 4 tons (approximately 8,000 lbs)
Engine: Kubota D1703 — 3-cylinder, water-cooled diesel
Horsepower: 25 HP @ 2,200 RPM
Hydraulic System: Piston pump with load-sensing multi-way valve
Hydraulic Flow: 79.2 L/min
Boom Force: 18.2 kN
Bucket Force: 30.4 kN
Max Digging Depth: 3,106 mm (approx. 10.2 ft)
Hydraulic Oil Tank: 55 L
Fuel Tank: 50 L
Travel Speed (Low): 2.4 km/h
Travel Speed (High): 4.2 km/h
Overall Length: 5,029 mm
Overall Width: 1,720 mm
Overall Height: 2,580 mm
Upper Width: 1,554 mm
Track Length: 2,150 mm
Standard Track Shoe Width: 300 mm
Track Type: Metal
Tail Swing: Zero tail swing (ZTS)
Cabin: Enclosed AC/Heater with LED lighting
What's Included: Standard digging bucket, toolbox, digital manual
Zero Tail Swing — Work Flush Against Anything The KUVUO 4.0's zero-tail-swing design is one of its most operationally important features. The machine's counterweight and upper body rotate entirely within the footprint of the tracks, meaning there is no dangerous rear overhang to collide with walls, vehicles, or bystanders when swinging. Contractors working in urban environments, residential renovation, utility trenching within tight right-of-ways, or single-lane road closures will find ZTS isn't just convenient — it's essential for safe, efficient work.
Kubota D1703 Engine — Proven Commercial-Grade Power The 25 HP Kubota D1703 3-cylinder diesel is a globally trusted engine renowned for its low maintenance requirements, fuel efficiency, and long service life. Running at 2,200 RPM, it provides strong, consistent torque without the wear and noise associated with high-revving engines. As with all Kubota powerplants, parts and service support are widely available throughout the United States, keeping downtime minimal if maintenance is ever needed.
Piston Pump Hydraulics with Load-Sensing Multi-Way Valve Unlike gear-pump systems found on lighter excavators, the KUVUO 4.0 uses a piston pump paired with a load-sensing multi-way valve — a setup that delivers hydraulic flow on demand rather than constantly. This translates to more responsive, smoother bucket and boom movements, better fuel efficiency under variable load conditions, and higher system pressure for greater breakout force. With 79.2 L/min of system flow and 30.4 kN of bucket breakout force, this machine moves material decisively through clay, hardpan, and rocky soil.
Boom Swing for Confined-Space Precision The boom swing allows the arm to pivot left and right independently of the house, enabling operators to dig parallel to walls and obstacles, cut trenches close to structures, and work in corners that would otherwise require constant machine repositioning. Combined with the zero-tail-swing design, the KUVUO 4.0 can operate in spaces that would be genuinely impossible for conventionally configured excavators of similar capacity.
Enclosed AC/Heater Cabin with LED Lighting The fully enclosed climate-controlled cabin sets the KUVUO 4.0 apart from open-canopy machines in the sub-4-ton class. Air conditioning and heating mean operators can work productively through summer heat and winter cold without fatigue or discomfort slowing them down. LED work lighting extends usable hours into low-light conditions, while the enclosed cab reduces noise and dust exposure over long shifts — a meaningful quality-of-life upgrade on any job that runs more than a few hours.
Pilot Controls — Light Touch, Precise Movement Pilot joystick controls use hydraulic pressure rather than mechanical linkage to transmit operator inputs, resulting in lighter, more feather-sensitive movement that reduces hand and arm fatigue over a full workday. Precision tasks like final grading, careful bucket placement near utilities, and working around established landscaping all become significantly easier with pilot controls compared to conventional direct-actuation joysticks.
Two-Speed Travel The two-speed travel system lets operators switch between a slower 2.4 km/h working speed for precision maneuvering and a 4.2 km/h transport speed for moving efficiently across job sites. This flexibility reduces the frustration of inching a slow machine across a large property and improves overall productivity between dig positions.
Metal Tracks — Built for Demanding Terrain Metal tracks provide superior traction and durability on rough, uneven, or rocky terrain compared to rubber tracks. They are the right choice for contractors working in construction sites, demolition areas, heavily rooted ground, and unimproved land where rubber tracks would wear prematurely or lose grip. The 300mm track shoe width distributes the machine's weight effectively across soft ground while delivering the aggressive bite needed in hard or uneven conditions.
Attachment-Ready Multi-Way Valve The KUVUO 4.0's multi-way valve system is designed to support auxiliary attachments including augers, hydraulic thumb clips, and hydraulic breaker hammers, expanding the machine well beyond simple bucket work. Whether you're drilling post holes, breaking concrete, or handling material with a grapple, the hydraulic infrastructure is already in place. (Attachments are compatible but sold separately.)
Extended Runtime Capacity The 50L fuel tank and 55L hydraulic oil tank are sized for serious sustained operation — not for a quick residential dig, but for full commercial workdays. Operators won't be constantly stopping to refuel or monitor fluid levels, keeping productivity high across extended projects.
